Instruction Manual

3. Basic Operation

Using the Viewfinder

Press [EVF] to switch between monitor and viewfinder.

A Eye sensor

Press [EVF].

• The monitor/viewfinder will switch as follows:

¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the

focus as the eye sensor is activated. (P57)

• You can also switch between the viewfinder and the monitor in [EVF/Monitor Switch] in [Eye

Sensor] in the [Custom] menu. (P57)

∫ Using the eye sensor to switch between monitor and viewfinder

Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the

viewfinder automatically when you bring your eye or an object near it.

•

The eye sensor might not work properly depending on the shape of your eyeglasses, the way

you hold the camera, or bright light shining around the eyepiece. In that case, press [EVF] to

switch the display.

• During motion picture playback or a slide show, the camera does not automatically switch the

display to the viewfinder with the eye sensor.

• You can set the eye sensor sensitivity in [Eye Sensor] in the [Custom] menu. (P57)

[EVF] button (Switching between Monitor and Viewfinder)

[EVF]/[FN5] button can be used in two ways, as [EVF] or

as [Fn5] (function 5). At the time of purchase, it is initially

set to [EVF/Monitor Switch].

•

Refer to P43 for details about the function buttons.

Automatic viewfinder/

monitor switching

Viewfinder display

Monitor display

ユヷョ

ョワブ