Instruction Manual

57
3. Basic Operation
Setting the eye sensor sensitivity and the method for switching between
monitor and viewfinder
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see the viewfinder displays clearly.
Look at the display in the viewfinder and rotate the diopter
adjustment dial until the displays on the
screen are in
focus.
A Diopter adjustment dial
If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically focuses
whenever
activated by the eye sensor.
•
Eye Sensor AF focuses only once when you look through the viewfinder, i.e. focusing is not
performed continuously.
• Beep sounds are not emitted when focusing is completed in [Eye Sensor AF].
Not available in these cases:
•
[Eye Sensor AF] may not work in dimly lit conditions.
> [Custom] > [Eye Sensor]
[Sensitivity]
This will set the sensitivity of the eye sensor.
[HIGH]/[LOW]
[EVF/Monitor
Switch]
This will set the method for switching between monitor and viewfinder.
[ ] (automatic switching between monitor and viewfinder)/
[EVF] (viewfinder)/[MON] (monitor)
• If you press [EVF] to switch the display, the [EVF/Monitor Switch] setting will
also switch.
About Eye Sensor AF
MENU