Instruction Manual

3. Basic Operation

∫ About the focusing range

The focusing range is displayed when operating the lens’

zoom function.

•

The focusing range is displayed in red when the subject is not

focused after pressing the shutter button halfway.

The focusing range may change gradually depending on the zoom position.

e.g.: Focusing range during the Program Mode

• When [Duration Time] is set to [HOLD], [Playback Operation Priority] is fixed to [ON].

Subjects and shooting conditions which are difficult to focus

•

Fast-moving, extremely bright subjects or those without contrast

• When shooting subjects through windows or near shiny objects

• When it is dark or when camera shake occurs

• When the camera is too close to the subject or when taking a picture of both distant and near

subjects

Displaying a picture right after it is taken

> [Custom] > [Auto Review]

[Duration Time]

Set the length of time that the picture is displayed after taking a

still picture.

[HOLD]:

The picture is displayed until the shutter button is pressed

halfway.

[5SEC]/[4SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]

[Playback Operation

Priority]

[ON] Switching the display of the playback screen, deleting

pictures, etc. is possible during [Auto Review].

[OFF] Button operations during [Auto Review] are the same as

those for recording.

400

0.3m

∞