Instruction Manual

3. Basic Operation
66
∫ About the tilt display
With the tilt display, it is easy to correct the camera’s alignment.
1 Press [DISP] to call up the tilt display.
2 Check the camera’s alignment.
A Horizontal direction:
Correcting tilt to the left
B Vertical direction:
Correcting downward tilt
• When the camera is only slightly tilted, the indicator changes to green.
• When recording with a vertical orientation, the display automatically switches to a
vertically oriented display.
• Even when the tilt indications are green, there may still be an error of approximately ± 1°.
• When a function button is set to [Level Gauge] is assigned to a function button, the tilt display
can be switched on/off by pressing that function button.
Not available in these cases:
•
The tilt may not be displayed correctly when the camera is in motion.
• When tilted significantly upwards or downwards during shooting, the tilt display may not be
displayed correctly, and the Direction Detection Function (P55) may not work correctly.
