Instruction Manual

83
4. Recording Modes
Mode:
This mode enables you to change the brightness and color tone to your preferred settings
as opposed to the ones set by the camera.
1 Press the rear dial to display the setting screen.
•
Each press of the rear dial switches between brightness setting, Defocus Control (P82)
and end operation.
2 Rotate the rear dial to adjust the brightness.
1 Press 1 to display the setting screen.
2 Rotate the rear dial to adjust the color.
•
This will adjust the color of the image from a reddish to a
bluish color.
• Press [MENU/SET] to return to the recording screen.
• If the [Exposure Comp. Reset] is set to [ON], the brightness setting will return to the default
level (center point) when the camera is turned off or switched to another recording mode.
• The color setting will return to the default level (center point) when the camera is turned off or
switched to another recording mode.
Changing the brightness or color tone
Setting brightness
Setting color
0
0 +5
+5
+5
SS
SS
SS
F
F
250 15
2.8 4.0
3060125
5.6
A
AB
B
B