Installation Manual

ProVision 3 Installation Manual

8100-35521-00

Rev. A0

Leidos Security Detection & Automation, Inc. – Proprietary Page 109 of 119

Figure 122: Monitor Mount Disassembly

3. Insert two provided thumb screws and snap into place as shown in Figure 123. These are for locking

monitor height.

Figure 123: Install Thumb Screws

5. Attach Monitor Mount to pole by sliding into one of four channels in the Monitor Pole. Ensure

manufacturer’s logo is readable and not upside-down. Refer to Figure 124.

Monitor Mounting Bracket

Monitor Mount