Installation Manual
ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 12 of 119
© 2020 Leidos. All rights reserved
1.0 Introduction
This manual details the installation steps for the ProVision
®
3 scanner, Model 1000-10002-PV.
1.1 Relevant Procedures
The following procedures are referenced in this installation manual and might be required to complete
movement or installation of certain components of the ProVision 3 scanner:
Document Title
Document No.
ProVision 2 Technical Manual
8100-23121-TM
ProVision 2 Installation Specification
8100-20571-00
ProVision 2 Isolation Footpad Procedure
8000-22070-IP
ProVision 2 Seismic Bracket Kit Installation
Procedure
8000-22056-IP
ProVision 2 Top Down Power Procedure
8600-28515-IP
ProVision 2 IP Router Installation Procedure
8000-23712-IP
ProVison 2 Remote OCP Installation Procedure
8000-27088-IP
ProVision 2 Belt Barrier and OCP
8000-21314-IP
ProVision 2 Power Panel Label Installation Procedure
8600-23942-IP
ProVision 2 System Mount Resolution Station
8600-26545-IP
1.2 Minimum Technical Qualifications
This manual assumes you are factory-trained by Leidos customer support personnel in the installation,
operation, maintenance and repair of the ProVision 3 scanner. It also assumes you have the following
minimum technical qualifications:
Associate’s Degree in Electronics, or 5 years of related job experience.
Full working knowledge of PC-type computer systems, using the Windows operating system.
Good working knowledge of complex digital and analog circuitry.
Some knowledge of complex mechanical systems.
Thorough familiarity with the use of test equipment, especially a DVM and oscilloscope.
1.3 Contacting Customer Support
As a qualified service technician, you are encouraged to contact Leidos Security Detection & Automation
customer support if you have any technical questions or require any additional information. It is Leidos
Security Detection & Automation In.’s responsibility to help you solve our customers’ problems as
professionally, efficiently, and safely as possible.
Do not spend an excessive amount of time troubleshooting unusually difficult or previously unknown
problems. If, after a few hours of professional, systematic troubleshooting techniques, you still cannot
locate the cause of the problem, contact Leidos customer support.