Manualshelf

Installation Manual

ManualsBrandsLeidos Security Detection & Automation ManualsElectronicsPV3 UPGRADE KIT AND PV3 SECURITY SYSTEM
31323334353637383940
ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 40 of 119
© 2020 Leidos. All rights reserved
Figure 33: Modified Cradle Fork and Lifting Bar Secured with Quick-Release Pin
15. Put a wheel chock behind each wheel of the Genie Lift wheelie bars (four in total).
Figure 34: Wheel Chock
16. Tap each wheel chock with your foot to wedge the chocks under the Genie Lift wheels.
17. Rotate the crank handles on the Genie Lifts a bit to take up the slack between the lifting bars and the
lifting brackets.
18. Remove the two remaining bolts securing each shipping leg to the lower frame, as shown in the
following figure.
Figure 35: Shipping Leg with Two Remaining Lower Bolts Removed