Installation Manual

ProVision 3 Installation Manual

8100-35521-00

Rev. A1

Leidos Security Detection & Automation, Inc. – Proprietary Page 42 of 119

Figure 37: Column Bolt Direction

9. Using a 24mm socket, torque three of the column base bolts to 94.9 Nm (70.0 ft-lb) in the following

order: first 1, then 2, then 3 (refer to the following figure). Leave bolt 4 (the bolt diagonally opposite

the leveling foot) loose.

Figure 38: Bolts 1–3 Torqued on Left (Top) and Right (Bottom) Columns

10. Loosen the shipping leg top bolts but do not remove them.