Installation Manual

ProVision 3 Installation Manual

8100-35521-00

Rev. A1

Leidos Security Detection & Automation, Inc. – Proprietary Page 43 of 119

11. Retrieve the two cross braces from the installation kit and attach each between the shipping legs on

either side of the assembly, as shown in the following figures.

Figure 39: Cross Braces Between Shipping Legs

12. Remove the bolt through each of two L brackets that is screwed vertically into the end of the swing

arm, as shown in the following figure.

Figure 40: Bolt Through L Bracket into Swing Arm

13. Remove the shipping leg top bolts.