Installation Manual

ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 5 of 119
© 2020 Leidos. All rights reserved
List of Figures
Figure 1: Hazardous Voltage and High Current Labels ..............................................................................14
Figure 2: Belt-Drive Safety Labels ..............................................................................................................16
Figure 3: Electrical Power Switch (Two Options) ......................................................................................16
Figure 4: Masts and Other Items on Top Shelf ...........................................................................................21
Figure 5: Scanner Crate with Top Shelf to Be Removed ............................................................................21
Figure 6: Column Screws to Be Removed ..................................................................................................22
Figure 7: Screws/Bolts and Brackets to Be Removed .................................................................................22
Figure 8: Installation Kit .............................................................................................................................23
Figure 9: Genie Lift Components ................................................................................................................24
Figure 10: Spring-Loaded Pin and Crank Handle (Rotated from In to Out) ...............................................25
Figure 11: Spring-Loaded Pin and Crank Handle and Carriage Lock Bar ..................................................26
Figure 12: Wheelie Bars (at Right) .............................................................................................................26
Figure 13: Fork Support Tubes....................................................................................................................27
Figure 14: Modified Cradle Forks with Rings in Place ...............................................................................27
Figure 15: Caster Assembly ........................................................................................................................28
Figure 16: Caster Positions ..........................................................................................................................28
Figure 17: Caster Orientation ......................................................................................................................29
Figure 18: Caster Caution Area ...................................................................................................................29
Figure 19: Caster Pivot Lock .......................................................................................................................30
Figure 20: Ramps Attached .........................................................................................................................31
Figure 21: Caster End Plate Installation ......................................................................................................31
Figure 22: Caster Attachment to Caster End Plate ......................................................................................32
Figure 23: Electrical Enclosure End of Upper/Lower Frame Assembly .....................................................34
Figure 24: Grip Point for Rotating Casters ..................................................................................................35
Figure 25: Bolts to Remove from Shipping Legs ........................................................................................36
Figure 26: Lifting Bracket with Quick-Release Pin Being Inserted ............................................................37
Figure 27: Lifting Bar Inserted Through Lifting Bracket and Pinned in Place ...........................................37
Figure 28: Column Head Clamp ..................................................................................................................37
Figure 29: Left and Right Columns .............................................................................................................38
Figure 30: Orientation of Columns ..............................................................................................................38
Figure 31: Columns Attached with Bolts and Column Head Clamps .........................................................39
Figure 32: Genie Lift Position .....................................................................................................................39
Figure 33: Modified Cradle Fork and Lifting Bar Secured with Quick-Release Pin ..................................40
Figure 34: Wheel Chock ..............................................................................................................................40
Figure 35: Shipping Leg with Two Remaining Lower Bolts Removed ......................................................40
Figure 36: Stop Bolt in Upper Bolt Hole .....................................................................................................41
Figure 37: Column Bolt Direction ...............................................................................................................42
Figure 38: Bolts 1–3 Torqued on Left (Top) and Right (Bottom) Columns ...............................................42
Figure 39: Cross Braces Between Shipping Legs .......................................................................................43
Figure 40: Bolt Through L Bracket into Swing Arm ..................................................................................43
Figure 41: Leveling Foot .............................................................................................................................45