Manualshelf

Installation Manual

ManualsBrandsLeidos Security Detection & Automation ManualsElectronicsPV3 UPGRADE KIT AND PV3 SECURITY SYSTEM
51525354555657585960
ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 56 of 119
© 2020 Leidos. All rights reserved
11.11 Cosmetic Mast Wrap
1. Retrieve the two rolls of cosmetic mast wrap (3000-32879-00).
2. Unroll the first wrap and remove the protective film from both sides, as shown in the following
figure.
Figure 58: Cosmetic Mast Wrap Protective Film Being Removed
3. Wipe down the now filmless wrap with electrostatic discharge (ESD) wipes (490-26003) included in
the hardware kit.
4. Fold the wrap around the mast so that its ends meet vertically along the back (outside) of the mast and
the holes line up as shown in the following figures.
Figure 59: Cosmetic Mast Wrap Installation