Manualshelf

Installation Manual

ManualsBrandsLeidos Security Detection & Automation ManualsElectronicsPV3 UPGRADE KIT AND PV3 SECURITY SYSTEM
51525354555657585960
ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 57 of 119
© 2020 Leidos. All rights reserved
5. Starting from the top of the mast and working down, insert the plastic push-in rivets (410-21034) as
shown in the following figure.
Figure 60: Push-In Rivets Inserted
6. Repeat steps 2 to 5 for the other mast.
11.12 End Cap Top Bracket
1. Install the first of four end cap brackets (3000-23128-00) use one nut plate (3000-23129-00) and two
M6x16mm SFH screws (0201-10293-16). The nut plate sits on top of the end cap bracket as shown
in below pictures.
2. Repeat for remaining three brackets.
Figure 61: Nut Plate