Installation Manual

ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. Proprietary Page 63 of 119
© 2020 Leidos. All rights reserved
5. Turn on the scanner and wait at least five minutes.
6. Connect the Ethernet cable that is attached to the upper end of the outer radome bracket support to a
field service laptop and turn the field service laptop on.
7. Wait at least five more minutes.
8. Log in to the laptop as sv_admin.
9. Double-click the Field Service Tool icon on the desktop to launch the Field Service Tool program.
10. Click Connect at upper right.
11. Click Start SVDiagnostics on the right side of the Field Service Tool window.
12. Click the Lip console button on the right side of the SVDiagnostics window.
13. Click Lip reset at the bottom of the LipConsole Dialog window.
14. The buttons on the right side of the window become activated. Click Pre-cal at the upper right of the
LipConsole Dialog window.
After Pre-cal is clicked, the masts move slowly in one direction, then at speed in the other before
moving to the calibration position. If the masts do not move to the calibration position, repeat the
previous two steps; if the masts still do not move, there is a problem that requires troubleshooting and
fixing.
15. Click Lip reset, then VCO cal (the second button at upper right).
16. Position the calibration beam in the center of the scanner.
17. Click Lip reset, then Closed cal (the third button at upper right).
18. Remove the calibration beam from the scanner.
19. Click Lip reset, then Open cal (the fourth button at right).
20. Click Lip reset, then Clutter cal (the fifth button at right). The scanner makes four mast sweeps;
ignore any errors.
21. Once Clutter cal is complete, click Close at the bottom of the window to close the Lip console and
return to the SVDiagnostics screen.
22. Click the Close Window icon (white X with a red background) at upper right to close
SVDiagnostics.
23. On the Field Service Tool screen, click Start Auto test on the right side of the window.