Installation Manual

ProVision 3 Installation Manual

8100-35521-00

Rev. A1

Leidos Security Detection & Automation, Inc. – Proprietary Page 66 of 119

Figure 70: Power Input Box in the Lower (Electrical Enclosure End) Position

11.25 Router

If an optional router is required, it should be installed in accordance with 8100-23121-TM option section

or 8000-23712-IP.

11.26 Remote OCP

If an optional remote OCP is required, it should be installed in accordance with 8100-23121-TM option

section or 8000-27088-IP.

11.27 Roof

1. Locate the roof (3000-27086-00) and position so that the perforated area is above the advanced

system control unit (ASCU) toward the electrical enclosure end.

2. Install one (0215-20642-00) clip per hole on edge of roof panel.