Installation Manual

ProVision 3 Installation Manual

8100-35521-00

Rev. A1

Leidos Security Detection & Automation, Inc. – Proprietary Page 8 of 119

Disclaimer

Leidos Security Detection & Automation, Inc., (“Leidos SD&A”), has made all reasonable efforts to ensure the

information in this manual is accurate and complete. Leidos Security Detection & Automation shall not be held

liable for any technical or editorial errors or omissions contained herein, or for incidental, special, or consequential

damages concerning the furnishing or use of this manual. The information contained in this manual is subject to

change without notice. Any comments or proposed changes should be submitted, in writing, to Leidos Security

Detection & Automation, Inc. to the attention of Documentation Control, Document Comments.

Proprietary Information Notice

This manual contains proprietary information that is protected by copyright, and all rights are reserved. No portion

of this document may be copied, photocopied, reproduced by any means, or translated into another language without

the prior written consent of Leidos Security Detection & Automation, Inc.

laws and international treaty provisions protect this document. It may not be reproduced or transmitted

electronically for the purpose of reproduction, either in whole or in part, without the prior, express, and written

consent of Leidos Security Detection & Automation, Inc.

Trademark

ProVision® is a registered trademark of Leidos Security Detection & Automation, Inc., in the United States and/or

other countries.

Classified Information Notice

For security reasons, the U.S. Federal Aviation Administration (FAA) and the U.K. Department for Transport (DfT)

have classified much of the information and data pertaining to the performance criteria, test results, and technical

aspects of Explosive Detection Systems. If additional information is required that is not part of Leidos Security

Detection & Automation proprietary documentation packages, qualified representatives of foreign governments and

aviation agencies should specifically request the information on letterhead. Leidos Security Detection & Automation

will make every effort to provide qualified individuals with detailed information in a manner consistent with the

Classifications Guide for FAA Explosive Detection Systems Information and Data in effect at the time of the

request. Contact Leidos Security Detection & Automation Customer Support for additional information.

Safety Disclaimer

Equipment that is used in a manner NOT specified by Leidos Security Detection & Automation may reduce any

protection provided by the system.

Warranty Disclaimer

Leidos Security Detection & Automation does not warrant that the operation of the Leidos Security Detection &

Automation products will be uninterrupted, error-free, or secure, that the Leidos Security Detection & Automation

products will comply with any rules or regulations applicable to the activities in which customers may employ the

Leidos Security Detection & Automation products, or that the Leidos Security Detection & Automation products

will operate to detect prohibited objects in all circumstances. You acknowledge that the real-world performance of

the Leidos Security Detection & Automation products may vary depending on your deployment, operation, and

application of the Leidos Security Detection & Automation product.