Manualshelf

Installation Manual

ManualsBrandsLeidos Security Detection & Automation ManualsElectronicsPV3 UPGRADE KIT AND PV3 SECURITY SYSTEM
81828384858687888990
ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 81 of 119
© 2020 Leidos. All rights reserved
6. The ramp assembly is secured with two M8 x 25mm SHC screws (0201-10018-25) as shown circled
in green in the following figure. Tighten the screws but do not over-tighten.
Figure 90: Ramp Assembly
7. Repeat steps 4 and 5 for the other ramp assembly at the opposite end of the scanner.