Manualshelf

Installation Manual

ManualsBrandsLeidos Security Detection & Automation ManualsElectronicsPV3 UPGRADE KIT AND PV3 SECURITY SYSTEM
81828384858687888990
ProVision 3 Installation Manual
8100-35521-00
Rev. A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 82 of 119
© 2020 Leidos. All rights reserved
11.48 Center Floor Board
1. Install the floor center panel (1000-26606-00) with the feet facing towards the right when viewed
from the electrical enclosure end.
2. Fasten the panel in place with eight M8 x 25mm SHC screws (0201-10018-25) as shown circled in
green in the following figure.
Figure 91: Floor Center Panel
CAUTION
Not installing the center floor panel correctly can cause a subject being screened to stand in the portal
facing the wrong direction. Doing so can have a drastic impact on scanning results.