Installation Manual

ProVision 3 Installation Manual
8100-35521-00
Rev. A0
Leidos Security Detection & Automation, Inc. – Proprietary Page 88 of 119
© 2020 Leidos. All rights reserved
Figure 97: SVDiagnostics
Figure 98: Calibration Window
8. Click on Pre-cal.
a. The system performs the motion cal (if this is after power-up) and VCO cal automatically.
b. If any faults occur click on LIP reset then click Pre-cal again.
9. Once complete, a green check appears beside both Pre-cal and VCO cal.