User's Manual

RTR-4 Operator’s Manual
120300 Rev. D SAIC Proprietary 5-13
Over Pulse Protection
Each Golden Engineering source has a duty cycle that sets the
maximum number of pulses that can be produced in a given time.
This is to prevent overheating in the source and stressing the
battery. The RTR-4 software will prompt the operator should a
selection be made that would overpulse the selected X-ray source.
Miscellaneous Accessories
Introduction
Miscellaneous accessories currently available for use with the
RTR-4 are the:
• Wireless Option Backpack.
• Notebook PC Configuration Accessories
Wireless Option Backpack
The RTR-4 wireless option backpack provides a compact,
convenient way of moving and operating the RTR-4 Wireless
Option configuration.
The backpack holds the following items:
• the imager unit
• the X-ray source unit
• the controller unit
• the wireless option equipment (including the
power/transceiver unit)
The backpack accessory uses the same imaging procedure as
would be used in a standard work space. The case with the
components inside can be worn as a backpack to carry the system
to another location.
The RTR-4 backpack is used in conjunction with the normal
transport cases. The items above are removed from their
transport case and put into the RTR-4 backpack. The equipment
is placed in the backpack for easy removal of the PC controller and
X-ray source, while the imager is left in the backpack connected
RTR0550