User's Manual

120300 Rev. D March 3, 2003 12:01 pm 4-1
4 System Operation
Introduction
This chapter describes how to operate the Standard RTR-4
system in both wired and wireless modes and contains the
following sections:
• Operating the RTR-4.
• Image Processing.
• Image Preservation.
• Software Description.
• Shutting Down and Stowing the RTR-4.
• Operator Maintenance.
Operating the RTR-4
Acquiring an X-Ray Image
Description
Follow this procedure to X-Ray an object.
Prerequisites
Verify the following prerequisites are completed before beginning
this procedure:
• The RTR-4 is configured in accordance with the applicable
setup procedure in the previous chapter.
• The Source and Imager units are correctly positioned around
the item to be X-Rayed and the source Safety Keyswitch has
been turned 90° clockwise.
• The RTR-4 imaging software has been properly configured and
is initiated and running.