User's Manual

RTR-4 Operator’s Manual System Operation
120300 Rev. D SAIC Proprietary 4-11
Procedure RTR0010
Display multiple images as follows:
Using the Grid Overlay
Description
The RTR-4 imaging software has a Grid Overlay feature to
assist the operator in determining the position and dimension of
components in an image. Follow this procedure to enable and
disable the Grid Overlay feature.
Prerequisites
Verify the following prerequisites are completed before beginning
this procedure:
• The RTR-4 imaging software has been properly configured and
is loaded and running.
• An image is displayed in the Original Buffer.
Procedure RTR 0011
Use the Grid Overlay feature as follows:
STEP ACTION
1 Select Multiple Original from the Preferences
pull-down menu.
NOTE
Once selected, Multiple Original will remain in
effect until cleared or the software program is closed.
2 At the Window pull down menu, select either:
• Tile Horizontal
• Tile Vertical
Depending upon selection, images will be displayed
one above the other or side by side.
STEP ACTION
1 Select Grid Overlay from the Display menu. A grid
appears over the displayed image.
2 Select Distance in Centimeters or Distance in
Inches from the Preferences pull-down menu.