User's Manual

System Operation RTR-4 Operator’s Manual
4-42 SAIC Proprietary 120300 Rev. D
12 Invert All Images
Select this command to view the display as a negative
(a positive image is normally displayed). This setting
disables itself when the RTR-4 imaging application is
exited.
13 Automatic Stretch All
Select this command to automatically optimize the
contrast of images that are opened or captured.
14 Autosave
Select this command to be prompted immediately
after each acquired image to save the image. The
Save As dialog box will appear.
15 Overpulse Protection
Use this command to select one of the following:
• No overpulse protection. (Ignores the duty cycle
constraint.)
• Warn about overpulsing. (Warns the operator
prior to firing the source.)
• Delay to prevent overpulsing.(Add an appropriate
delay to prevent overpulsing.)
NOTE: Overpulse protection is required to prevent
overheating of the source and stressing the source
battery.
16 Source
Use this command to select one of the four RTR-4
radiation sources:
• XR-200
• XR-150
•XRS-3
•Inspector
STEP ACTION