User's Manual

120300 Rev. D SAIC Proprietary 1-1
1 Introduction
About this Manual
This manual provides information on the setup and use of the
various options and configurations of the Real Time Radioscopy
(RTR-4) Imaging System and is comprised of the following
chapters:
Chapter 1 - Introduction
Chapter 2 - Safety Summary
Chapter 3 - System Description, Setup, and Quick Start
Chapter 4 - System Operation
Chapter 5 - Ancillary Equipment
Purpose and Scope
This manual describes the RTR-4 hardware and software and
provides instructions on its use, including setup of the equipment,
acquisition and processing of X-ray images, and some
troubleshooting. The information in this document is to be used
only by technicians and operators who have been trained to use
the RTR-4 system.
Document Revisions
This manual is revised periodically, based on the amount and
substance of equipment changes and resulting changes to the
manual. When changes to this manual are required, a new
manual incorporating the changes is released.
RTR-4 Technical Support
Technical support is available using the following methods:
• By phone: [phone] (in the US) or 858-826-9831 (outside
of the US) from 0730 to 1630 PDT.
• By fax: [phone].
• By e-mail: [e-mail].
More information may be found on our website at
http://www.saic.com.