Instructions / Assembly
Congratulations
on your assembly!
STEP 1: STEP 2:
STEP 3:
54QT. COOLER
ITEM # TX 94009 , TX 94012 , TX 93811 , TX 93812
A
Phillips
Screwdriver
Tools required for assembly
SCREW
COOLER BOX
S04-4
X 24PCS
1. Do not tighten bolts until fully assembled.
2. Recessed holes to face outward.
3. Insert bolts with washer and secure with washer and nut.
4. Pre-checked side must always face downward or inward.
IMPORTANT: READ CAREFULLY BEFORE BEGINNING
Recessed Hole
Pre-Checked
PARTS AND HARDWARE LIST
1
3
2
X 1PC
LEG
LEG W/BOTTLE OPENER
X 1PC
X 3PCS
1
A
A
2
3
Place the COOLER BOX (1) upside down and fit all the LEGS (2+3)
on each corner of the COOLER BOX (1).
Ensure that the LEG with BOTTLE OPENER (3) is on the front side
that has the medallion.
Use a screwdriver to
screw all twenty-four
SCREWS (A) in the pre-drilled
holes on the LEGS.
There are six SCREWS (A)
for each LEG.
Flip over the
Assembled Cooler.
Lastly, ensure that
all the screws are
tightened.