SDS

SAFETY DATA SHEET
Date Prepared : 02/05/2015
SDS No. : RB Mineral Out
Date Revised : 04/06/2015
Revision No : 1
Robelle Industries - Mineral Out
CARCINOGENICITY: Not listed by NTP, IARC or OSHA.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS
Phosphonic Acid, (1-hydroxyethylidene)bis- 30 - 50 2809-21-4
COMMENTS: Proprietary blend. Ingredients in this section have been determined to be hazardous as defined by 29CFR
1910.1200.
4. FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.
SKIN: Immediately wash with large amounts of water; use soap, if available. Remove contaminated clothing, including shoes, after
washing has begun. Get immediate medical attention.
INGESTION: DO NOT induce vomiting. If individual is conscious, give milk or water to dilute stomach contents. Keep warm and
quiet. Get prompt medical attention. DO not attempt to give anything by mouth to an unconscious person.
INHALATION: In case of adverse exposure to vapors and/or aerosols, immediately remove the affected victim from exposure and
get immediate medical attention. If breathing is difficult, give oxygen. If breathing stops, give artificial respiration.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Use extinguishing media appropriate for surrounding fire.
FIRE FIGHTING PROCEDURES: Material will not burn. Containers can build up pressure if exposed to heat (fire). Use water
spray to cool fire-exposed surfaces and to protect personnel.
FIRE FIGHTING EQUIPMENT: Firefighters should wear self-contained breathing apparatus (SCBA) in positive pressure mode, if
possible, and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: For spills, implement cleanup procedures.
LARGE SPILL: Implement cleanup procedures and if in public areas, advise authorities.
ENVIRONMENTAL PRECAUTIONS
WATER SPILL: Prevent additional discharge of material, if possible to do so without hazard. Request all to stay clear. This
material is water soluble/dispersible, and may not be recoverable.
LAND SPILL: Prevent additional discharge of material, if possible to do so without hazard. Warn occupants and downwind
areas of corrosive release hazard and request all to stay clear.
GENERAL PROCEDURES: Contain spilled liquid with sand or earth. Recover by pumping or with suitable absorbent.
RELEASE NOTES: Recycle or dispose of recovered material in accordance with all federal, state, and local regulations.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Keep containers closed. Open container carefully and handle with care. Store in a cool, well-
ventilated place away from incompatible materials. Do NOT pressurize, cut, heat or weld containers. Empty product containers
may contain product residue. Do not reuse empty containers.
STORAGE: Corrosive to most metals, including carbon steel, aluminum/aluminum alloys and copper /copper alloys.
STORAGE TEMPERATURE: Ambient.
Page 2 of 5