User Manual

5
EN
•
Never attempt to charge non-rechargeable bat-
teries (danger of explosion!).
Inserting/changing batteries
The batteries are already installed when the device
is shipped. Remove the protective lm before using.
1. To open the battery compartment, unscrew the
top of the pen.
2. Insert three LR41 coin cell batteries into the bat-
tery compartment. Pay attention to the polarity
(+/–).
3. Close the battery compartment.
Using the product
•
To switch between tablet stylus and pen, just pull
out the lower part of the stylus. Re-insert it in the
desired direction.
•
To use the laser pointer: Hold the pen so that
the laser outlet
A
is facing away from you. Then
press the laser button
C
.
•
To use the LED light: Hold the pen so that the
outlet
B
is facing away from you. Then press the
LED button
D
.
Technical Data
Operating voltage DC 4.5 V (3 coin cell batteries,
type LR41)
Laser output power <1 mW
Laser wavelength 630–680 nm
Laser class 2
Permissible ambient
temperature (operation)
0–40 °C
Dimensions (Ø × L) 11 mm × 143 mm
Weight 48 g
Disposal
The crossed-out wheelie bin indicates
that this product must not be disposed of
with household waste (residual waste).
You must dispose of electric and elec-
tronic appliances and empty batteries
at specially provided public locations. There is no
charge for disposal. For more information, contact
your local city or district council or the shop where
you purchased the product.
Additional Information
Up-to-date information and/or further details for
use can be obtained from the product description at
http://www.leitz.com/. Or scan the QR code on the
back of this manual.