Manual

Deutsch
English
日日本本語語
中文
Italiano
Français
EspañolPortuguês
Русский
12
04/2012 ID.524660 V1.0
Transport only with suitable packaging.
Be very careful when packing / unpacking!
D
anger of damage!
1.4.3
Assembly of the tool
Wear safety gloves!
Danger of injury by sharp cutting edges!
Always mount all parts. Use corresponding parts of the same weight to avoid unbalance.
Cutting parts, seatings and clamping elements shall be free of dirt, e.g. resin, grease, oil or
water.
Screw heads have to be cleaned to guarantee the correct and tight interlocking with the
wrench.
Danger of injuring from parts flying off.
Tighten clamping screws and nuts by using appropriate mounting tool and the
recommended torque.
The extension of wrenches or the use of hammer blows is not permitted!
Unless otherwise noted, following torque is valid: