Operation Manual

Pairing the speaker with a device

If you have already paired the speaker with the device, it is normally

sufcient to turn both devices on. Otherwise perform the following

actions.

1. Slide the main switch to the Bluetooth position.

While the speaker is searching for an already paired device, the

status indicator blinks 6 times blue. If no device is found, the

status indicator blinks alternately red and blue.

2. Activate the searching mode on the other device. (Refer to the

other device’s manual for details if necessary.)

3. Once the speaker appears as a found device (“Leitz 6358”),

select it.

4. If prompted, enter “0000” as a code or password.

Once the connection is established, the status indicator lights

steadily blue. Audio reproduction and control are now carried out

through the speaker.

Note: The device pair coupled via Bluetooth operates according to

the supported protocols. Smartphones, for example, usually use

HFP (Hands-free prole) and A2DP (Advanced Audio Distribution

Prole). Therefore, in this case, the speaker can both manage

calls and control audio reproduction. With an MP3 player with

A2DP only audio reproduction will work, and with a simple mobile

phone only calls can be handled.

Playing back audio les from a microSD card

You can use this product to play back MP3 and WAV format audio

les saved on a microSD card.

1. Insert the microSD card into the card slot until it snaps into place.

Make sure the contacts are facing upwards when inserting the

card.

2. Slide the main switch to the MP3 position.

Use the buttons on the speaker to control audio reproduction.