manual

ManualsBrandsLEM Products ManualsDomestic Appliances1113

ATTENTION

If any components of this unit are broken,

or if the unit does not operate properly,

please contact LEM Products at

1-877-536-7763

For more great products or a free catalog

log onto www.lemproducts.com

#8 Electric Meat

Grinder

MODEL #1113

120V~60Hz, 575W

LEM Products

109 May Drive • Harrison, OH 45030

877-536-7763

www.lemproducts.com

Summary of content (4 pages)

PAGE 1
ATTENTION If any components of this unit are broken, or if the unit does not operate properly, please contact LEM Products at 1-877-536-7763 #8 Electric Meat Grinder MODEL #1113 120V~60Hz, 575W For more great products or a free catalog log onto www.lemproducts.com LEM Products 109 May Drive • Harrison, OH 45030 877-536-7763 www.lemproducts.
PAGE 2
IMPORTANT WARRANTY INFORMATION BELOW: PLEASE READ, FILL OUT AND RETURN ENCLOSED WARRANTY CARD TO ENSURE WARRANTY COVERAGE. THIS WARRANTY COVERS LEM PRODUCTS #8 575 WATT ELECTRIC MEAT GRINDER THE WARRANTY IS EXTENDED TO THE ORIGINAL PURCHASER ONLY. WARRANTY DURATION: This product is warranted to the original purchaser for a period of one (1) year from the original purchase date.
PAGE 3
IMPORTANT SAFEGUARDS Tips ◆ Cord storage is under motor housing. ◆ If the grinder is locked, turn grinder off and press the reverse button. If this does not unlock the grinder, turn the unit off, unplug the electrical cord from the outlet and disassemble the grinder head and remove the obstruction. Reassemble and continue grinding. How to clean your grinder: Meat left behind in the grinder head may be removed by passing a slice of bread through the grinder head. 1.
PAGE 4
Grinder Assembly 1. Attach the grinder head to the motor housing. It will be necessary to push the release button (#4) when putting the head on the motor. 2. Insert the worm gear/auger into the grinder head, the geared end first. 3. Place the grinder knife onto the auger stud. (The cutting edges should be facing out and flat against the grinder plate when properly installed.) 4. Place the medium or coarse grinding plate (depending on the consistency you prefer) onto the worm gear/auger.