Users Manual
alphanumerically, then off-air stations.
To change station order, select Menu > Station order > then Alphanumeric, Ensemble
or Valid.
7. FM radio mode
FM radio mode receives analogue radio from the FM band and displays RDS
(Radio Data System) information about the station and show (where broadcast).
To enter FM mode, either press mode to choose FM Radio or select Menu >Main
menu >FM.
7.1 Selecting stations
To find a station, press Select. The frequency display starts to run up as MSY5 scans
the FM band. Alternatively, you can scan up or down by pressing and holding the >> or
<<buttons or tune manually with quick presses, or by turning the Select control.
Presets to store an FM preset, press and hold button Presets until the display shows the
Save preset screen. Select one of the 20 presets to save the currently playing station.
To select a preset, press Presets briefly, then select one of the listed Preset stations.
When a preset station is playing, it shows 1,2,3 etc in the bottom middle of the
screen.
7.2 Now playing information
While an FM station is playing, the screen shows one of the two following sets data:
If RDS information is available, by default the service name (i.e. station name) is
displayed.
You can cycle through further RDS information by pressing Info .Each time you press
Info, another set of information is displayed, cycling through RDS radio text, RDS
programme type, frequency and today’s date.