Users Manual

2. Turn on the Bluetooth on your enabled device.
3. Select Bluetooth device name “LEMEGA MSY5” when it appears on your device’s
screen to initiate searching.
4. You can start to play your music files wirelessly. Adjust the volume level on your
device.
You should not have to pair your device again.
Depending on your device, you may need to make multiple attempts at Pairing and/or
Connecting to the “LEMEGA MSY5”, but please give your device adequate time to Pair
or Connect before repeating the process.
Pairing a Bluetooth Wireless Technology Enabled iPhone /iPod touch/iPad
1. Press source to select Bluetooth mode. This will power on the Bluetooth.
Turn the volume up about ¼ to start. Also turn up the volume on the source device (the
device you are streaming from).
2. Select “Settings”. (Depending on software version)
3. Select “General”.
4. Select “Bluetooth”.
5. Switch Bluetooth “On” to initiate searching.
6. Select “LEMEGA MSY5” when it appears on the display.
7. You can begin playing your music files wirelessly once the BT logo is stop flashing at
the bottom right of the display.(means connected successfully).
Adjust the volume level on your device. You should not have to pair your
iPhone/iPod/iPad again. The volume output level of music files varies.
If you prefer an even higher output level, check the settings in your iPhone/iPod
touch/iPad:
Set the EQ Off, the Sound Check Off, and the Volume limit Off. If you encounter a
problem Pairing, press the small arrow to the right of “LEMEGA MSY5” on your
iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing
process. Depending on your device.
You may need to make multiple attempts at Pairing and/or Connecting to the MSY5, but
please give your device adequate time to Pair or Connect before repeating the process.
10 My Music with USB playback