Datasheet
139www.lemo.com
®®
Blanking caps for free sockets
BRD.00.200.PCSG
BRD.0B.200.PCSG
BRD.1B.200.PCSG
BRD.2B.200.PCSG
BRD.3B.200.PCSG
Dimensions (mm)
Series
ABLMN
00 7.5 9.8 9.0 3.5 85
0S-0B 10.0 12.5 11.0 4.8 85
1S-1B
14.0 17.0 13.5 5.6 85
1D
2S-2B 18.0 21.0 14.5 6.0 85
3S-3B 22.0 25.5 17.0 7.0 95
L
M
B
ø A
N
Fitting the cord
Slide the socket into the loop of the cord.
Place the loop into the groove in front of the collet nut.
Tighten the loop.
Note: on request this cap is available in black. If required, replace the
last letter «G» of the part number by «N».
● Body material: Polyoxymethylene (POM) grey (or black)
● Cord material: Polyamide 6, grey (or black)
● Gasket material: Silicone rubber
● Maximum operating temperature: 100°C
● Watertightness: IP61 according to IEC 60529
BRD
Part number
ø A
N
B
M
L
sliding loop
Blanking caps for free sockets
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (sili-
cone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
● Body material: Nickel-plated brass (Ni 3 µm)
● Lanyard material: Stainless steel
● Crimp ferrule material: Nickel-plated brass + polyolefin
BRF
BRF.0K.200.NAS
BRF.1K.200.NAS
BRF.2K.200.NAS
BRF.3K.200.NAS
BRF.4K.200.NAS
BRF.5K.200.NAS
Part number
● O-ring material: Silicone rubber or FPM
● Maximum operating temperature: 135°C
● Watertightness: IP68 according to IEC 60529
Dimensions (mm)
Series
AB LMN
0K-0E-0L 15.0 10 15.0 4 85
1K-1E-1L 17.0 12 20.0 6 85
2K-2E-2L 20.5 14 24.0 8 85
3K-3E 24.0 14 28.0 8 120
4K-4E 30.0 20 30.5 10 120
5K-5E 44.0 22 37.0 12 150
Blanking caps for free sockets
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (sili-
cone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
● Body material: Nickel-plated brass (Ni 3 µm)
● Lanyard material: Stainless steel
● Crimp ferrule material: Nickel-plated brass + polyolefin
● O-ring material: Silicone rubber or FPM
● Maximum operating temperature: 135°C
● Watertightness: IP61 according to IEC 60529 for S series
BRF
ø A
M
sliding loop
B
L
N
BRF.00.200.NAS
BRF.0S.200.NAS
BRF.1S.200.NAS
BRF.2S.200.NAS
BRF.3S.200.NAS
BRF.4S.200.NAS
BRF.5S.200.NAS
BRF.6S.200.NAS
Dimensions (mm)
Series
ABLMN
00 8 7.5 8.8 3.5 85
0S-0B 10 9.5 10.5 4.5 85
1S-1B
14 11.0 12.5 5.0 85
1D
2S-2B 18 12.0 14.0 6.0 85
3S-3B 22 14.0 18.0 8.0 120
4S-4B 28 20.0 23.0 10.0 120
5S-5B 40 22.0 30.0 12.0 150
6S 54 22.0 30.0 12.0 150
Part number