Datasheet
FFP Straight plug, cable collet, PEEK or POM
outer shell, inner anti-rotating device
and nut for fitting a bend relief
1)
Reference
Model Series
Dimensions (mm)
ALMS2
FFP 1S
FFP 2S
FFP 3S
These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The
design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.
Mechanical and Climatical
Technical Characteristics
Note:
1)
to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
Standard
natural (beige) black white or grey cream –
> 5000 cycles > 5000 cycles > 5000 cycles > 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C –
- 50° C/+250° C - 50° C/+115° C - 50° C/+150° C - 50° C/+180° C –
> 200 cycles none ~20 cycles > 100 cycles IEC 60601-1 § 44.7
very good very good limited good –
Colour
Endurance
Humidity
Temperature range
Sterilization resistance
1)
Resistance to organic solvents
Characteristics
Value
PEEK POM PSU PPSU
Note:
1)
Steam sterilization
FFA Straight plug, cable collet, PEEK or POM
outer shell
Reference
Model Series
Dimensions (mm)
ALMS2
FFA 00
FFP 1S
FFP 2S
FFP 3S
FFP Straight plug, cable collet, PEEK or POM
outer shell and inner anti-rotating device
S 2
~M
~L
ø A
~M
~L
ø A
S 2
7.0 33.5 25.5 6.0
12.0 42.5 31.5 10.0
15.0 52.0 40.0 12.0
18.0 61.0 46.0 14.0
12.0 41.5 30.5 10.0
15.0 51.0 39.0 12.0
18.0 61.0 46.0 14.0
70 www.lemo.com
®
®
Plastic housing models
ø A
~M
~L
S 2
FFL Straight plug, cable collet, with PSU
and PPSU outer shell, inner anti-rotating device
and nut for fitting a bend relief
1)
Dimensions (mm)
ALMS2
16.5 51.5 39.5 13
Reference
Model Series
FFL 2S
Note:
1)
to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
This model is fitted with a «D or M» type collet system.
It is also adapted for crimp contacts.
Available only for multipole.
M1
Cable assembly
(pages 163 and 164)
M1
Cable assembly (pages 163 and 164)
M4
Cable assembly (page 165)