Datasheet
142 www.lemo.com
®
®
Ref.
A
B
G
J
M
Colour
blue
white
grey
yellow
brown
Ref.
N
R
S
V
Colour
black
red
orange
green
Note: the selection of pigments, which should remain sta-
ble at high temperature, is limited by the new regulations. For
this reason, some colours will be a shade different from
those used for Desmopan bend reliefs. The selected solu-
tions represent the best possible compromise.
A bend relief has been designed for connectors used in
applications at high temperature or requiring vapour steril-
ization.
These bend reliefs are different from previous ones as for
their material, a silicone elastomer which is noted for its
retention of flexibility over a wide temperature range. They
are available in nine colours.
Use the part numbers shown below to order this acces-
sory separately.
Bend relief (Silicone)GMA
L
ø A
Main characteristics
● Material: Silicone elastomer VMQ
● Temperature range in dry atmosphere: -60°C +200°C
● Temperature range in water steam: +140°C
Note: the last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page
142 and replace the letter «G» by the letter of the required colour.
See also detailed information for each series: B series on page 54: K series on page 54; S series on page 107; E series on page 107.
Part number
2.5 27 2.9 2.5
3.0 27 3.4 3.0
3.5 27 3.9 3.5
4.0 27 4.4 4.0
4.5 27 5.2 4.5
4.0 41 4.4 4.0
4.5 41 5.0 4.5
5.1 41 5.6 5.1
5.7 41 6.2 5.7
6.3 41 7.0 6.3
7.1 41 7.9 7.1
8.0 41 9.0 8.0
2.5 34 2.9 2.5
3.0 34 3.4 3.0
3.5 34 3.9 3.5
4.0 34 4.4 4.0
4.5 34 5.0 4.5
5.1 34 5.6 5.1
5.7 34 6.2 5.7
6.3 34 7.0 6.3
0B
0S
0E-0K-0L
2B
2S
2E-2K-2L
2C-2G
1B-1D
1S
1E-1K-1L
GMA.0B.025.RG
GMA.0B.030.RG
GMA.0B.035.RG
GMA.0B.040.RG
GMA.0B.045.RG
GMA.2B.040.RG
GMA.2B.045.RG
GMA.2B.051.RG
GMA.2B.057.RG
GMA.2B.063.RG
GMA.2B.071.RG
GMA.2B.080.RG
GMA.1B.025.RG
GMA.1B.030.RG
GMA.1B.035.RG
GMA.1B.040.RG
GMA.1B.045.RG
GMA.1B.051.RG
GMA.1B.057.RG
GMA.1B.063.RG
Dimensions (mm)
Bend relief Cable ø
ALmax. min.
Series
Part number
Dimensions (mm)
Bend relief Cable ø
ALmax. min.
Series