Datasheet

132 www.lemo.com
®®
Tapered washers
ø C
L
ø A
Part number
Dimensions (mm)
Series
ACL
Note: sockets of series 5B and 5S are always supplied with a tapered
washer. To order this accessory separately, use the above part numbers.
Locking washers
ø C
L
ø A
Note: to order this accessory separately, use the above part numbers.● Material: Nickel-plated bronze (3 µm)
● Material: Nickel-plated brass (3 µm)
GBA
GBB
GBB.00.250.LN
GBB.0S.250.LN
GBB.1S.250.LN
GBB.2S.250.LN
GBB.3S.250.LN
GBB.4S.250.LN
GBB.5S.250.LN
00 9 7.1 2.0
0S-0B 11 9.1 2.5
1S-1B 15 12.1 3.5
2S-2B
18 15.1 4.0
2C-2G
3S-3B 22 18.1 4.5
4S-4B 28 25.2 5.0
5S-5B 40 35.2 7.5
Part number
GBA.00.250.FN
GBA.0S.250.FN
GBA.1S.250.FN
GBA.1E.250.FN
GBA.2S.250.FN
GBA.3S.250.FN
GBA.4S.250.FN
Dimensions (mm)
Series
ACL
00 9.5 7.1 1.0
0S-0B 12.5 9.1 1.0
1S-1B
16.0 12.1 1.0
1D
1E-1K 21.8 16.1 1.2
2S-2B
19.5 15.1 1.2
2C-2G
3S-3B 25.0 18.1 1.4
4S-4B 32.0 25.1 1.4
Hexagonal nuts
e
L
A
B
Note: to order this part separately, use the above part numbers. The last
letters «LN» of the part number refer to the nut material and treatment. If
a nut in aluminium alloy or stainless steel is desired, replace the last let-
ters of the part number by «PT» or «AZ» respectively.
● Material:
– Nickel-plated brass (3 µm)
– Natural anodized aluminium alloy
– Stainless steel
GEA
Part number
GEA.00.240.LN
GEA.0S.240.LN
GEA.0S.241.LN
GEA.0E.240.LN
GEA.1S.240.LN
GEA.1E.240.LN
GEA.2S.240.LN
GEA.2E.240.LN
GEA.3S.240.LN
GEA.3E.240.LN
GEA.4S.240.LN
GEA.4E.240.LN
Dimensions (mm)
Series
AB e L
00 9 10.2 M7 x 0.50 2.0
0S-0B 11 12.4 M 9 x 0.60 2.0
0S-0B 12 13.8 M10 x 0.75 2.5
0E-0K-0L
17 19.2 M14 x 1.00 2.5
1S-1B
1S-1B-1D 14 15.8 M12 x 1.00 2.5
1E-1K-1L
19 21.5 M16 x 1.00 3.0
2S-2B
2S-2B 17 19.2 M15 x 1.00 2.7
2E-2K-2L 24 27.0 M20 x 1.00 4.0
3S-3B 22 25.0 M18 x 1.00 3.0
3E-3K 30 34.0 M24 x 1.00 5.0
4S-4B 30 34.0 M25 x 1.00 5.0
4E-4K 36 40.5 M30 x 1.00 7.0