Datasheet
138 www.lemo.com
®
®
BRE.0K.200.NAS
BRE.1K.200.NAS
BRE.2K.200.NAS
BRE.3K.200.NAS
BRE.4K.200.NAS
BRE.5K.200.NAS
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (sili-
cone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
● Body material: Nickel-plated brass (Ni 3 µm)
● Lanyard material: Stainless steel
● Crimp ferrule material: Nickel-plated brass + polyolefin
● O-ring material: Silicone rubber or FPM
● Maximum operating temperature: 135°C
● Watertightness: IP68 according to IEC 60529
B
ø A
M
ø 3.5
L
N
Blanking caps for fixed socketsBRE
Dimensions (mm)
Series
AB LMN
0K-0E-0L 15.0 10 15.0 4 85
1K-1E-1L 17.0 12 20.0 6 85
2K-2E-2L 20.5 14 24.0 8 85
3K-3E 24.0 14 28.0 8 120
4K-4E 30.0 20 30.5 10 120
5K-5E 44.0 22 37.0 12 150
Blanking caps for fixed sockets
BRE.00.200.NAS
BRE.0S.200.NAS
BRE.1S.200.NAS
BRE.2S.200.NAS
BRE.3S.200.NAS
BRE.4S.200.NAS
BRE.5S.200.NAS
BRE.6S.200.NAS
BRE.6E.200.NAS
Note: these caps are suitable for use with any alignment key configuration.
The last letter «S» of the part number stands for the O-ring material (sili-
cone rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
● Body material: Nickel-plated brass (Ni 3 µm)
● Lanyard material: Stainless steel
● Crimp ferrule material: Nickel-plated brass + polyolefin
● O-ring material: Silicone rubber or FPM
● Maximum operating temperature: 135°C
● Watertightness: IP61 according to IEC 60529 for S series
BRE
ø A
M
N
B
ø 3.5
L
Dimensions (mm)
Series
ABLMN
00 8 7.5 8.8 3.5 60
0S-0B 10 9.5 10.5 4.5 85
1S-1B
14 11.0 12.5 5.0 85
1D
2S-2B 18 12.0 14.0 6.0 85
3S-3B 22 14.0 18.0 8.0 120
4S-4B 28 20.0 23.0 10.0 120
5S-5B 40 22.0 30.0 12.0 150
6S 54 22.0 30.0 12.0 150
6E 57 24.0 31.5 14.0 150
Part number
Part number
Blanking caps for fixed socketsBRA
ø A
L
M
N
ø 3.3
● Material: black EPDM
● Lanyard material: Stainless steel
● Crimp ferrule material: Stainless steel AISI 304 + polyolefin
Note: These caps are suitable for use with any alignment key configuration.
ø A
L
M
N
Blanking caps for free sockets
BRF.3K.200.EAN
BRF
Part number
● Material: black EPDM
● Lanyard material: Stainless steel
● Crimp ferrule material: Stainless steel AISI 304 + polyolefin
Note: These caps are suitable for use with any alignment key configuration.
BRA.3K.200.EAN
BRA.4K.200.EAN
3K 24 27 14.5 120
4K 31 31 17.0 120
Dimensions (mm)
Series
ALMN
Part number
3K 24 27 14.5 155
Dimensions (mm)
Series
ALMN