Datasheet

143www.lemo.com
®®
L
ø A
Bend relief for straight plug
● Material: Elastomer rubber black colour
● Operating temperature: -30°C to +120°C
GMF
0S-0B 11.0 60.5 3.5 1.0
1S-1B 16.0 72.0 6.2 2.5
2S-2B 22.0 95.0 8.2 5.0
L
ø A
Bend relief for free socket
● Material: Elastomer rubber black colour
● Operating temperature: -30°C to +120°C
GMP
Dimensions (mm)
Series Bend relief Cable ø
A L max. min.
Overall bend reliefs, type GMF for plugs and GMP for sockets offer optimum protection against mechanical damage and give
a protection index of IP65 according to IEC 60529 (mated position). These bend reliefs slide easily over the connector
shell and are positioned by slightly pressing the bend relief backnut.
The special design of the bend relief for plug provides for easy use of the push-pull self-latching system.
Overall bend relief for plugs and socketsGM●
Part number
GMF.0B.035.060EN
GMF.1B.062.072EN
GMF.2B.082.095EN
0S-0B 11.0 69.0 3.5 1.0
1S-1B 16.0 80.0 6.2 2.5
2S-2B 21.0 102.5 8.2 5.0
Dimensions (mm)
Series Bend relief Cable ø
A L max. min.
Part number
GMP.0B.035.069EN
GMP.1B.062.079EN
GMP.2B.082.102EN
– The overall bend relief shall be installed over plug or free socket fitted with a nut for bend relief.
– The typical applications are shown below.
– The overall bend relief can be cut at different length depending on cable diameter.
Plug-free socket
Plug-fixed socket
Optimum protection is offered only when using
front panel mounting fixed sockets
PCA FFA S series
PHG FGG B series
ERA FFA S series
EGG FGG B series