Datasheet
119www.lemo.com
ø 20
M15 x 1
S 13.8
4
5 maxi
20 maxi
ø 19.2
S 17
HGP.2C Fixed socket, nut fixing,
watertight or vacuumtight
ø 20
5.7
10.6
5.2 maxi
20 maxi
M15 x 1
S 13.8
ø 20
3.5
HEP.2C Fixed socket, nut fixing, watertight
or vacuumtight
(back panel mounting)
> 500 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C, +80° C
> 144h IEC 60512-6 test 11f
Endurance
Humidity
Temperature range
Salt spray corrosion test
Characteristics Value Standard
Mechanical and Climatical
20/80/21 IEC 60068-1
< 10
-7
mbar.l.s
-1
IEC 60512-7 test 14b
5 bars IEC 60512-7 test 14d
Climatical category
Leakage rate (He)
1)
Maximum operating pressure
Characteristics Value Standard
Note:
1)
only for vacuumtight models.
Technical Characteristics
These socket allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully
compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation,
etc.
These models are identified by a letter «P» at the end of the reference.
These models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end
of the part number (certificate on request).
Epoxy resin is used to seal these models.
Panel cut-out (page 122)Panel cut-out (page 122)
Watertight or vacuumtight models
®
®