Datasheet

72 www.lemo.com
®®
L maxi
S 3 S 1
M
e
ø B
ø A
E maxi
HGP Fixed socket, nut fixing, watertight or vacuumtight
Reference
Model Series
HGP 0S
HGP 1S
HGP 2S
HGP 3S
HGP 4S
HGP 5S
HGP 6S
Dimensions (mm)
AB e E LL
1)
MS1S3
Characteristics Value Standard
Mechanical and Climatical
Technical Characteristics
Note:
1)
unipole model
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
- 20° C/+80° C
> 144h IEC 60512-6 test 11f
20/80/21 IEC 60068-1
< 10
-7
mbar.l.s
-1
IEC 60512-7 test 14b
Endurance
Humidity
Temperature range (0S-1S)
Temperature range (2S-6S)
Salt spray corrosion test
Climatical category
Leakage rate (He)
1)
Note:
1)
only for vacuumtight models.
These socket or coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529.
They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equip-
ment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Note: the 5S and 6S series are delivered with a round nut.
Characteristics Value Standard
60 bars
60 bars
40 bars
30 bars IEC 60512-7 test 14d
15 bars
5 bars
5 bars
0S
1S
2S
3S
4S
5S
6S
Maximum
operating pressure
2)
Note:
2)
this value corresponds to the maximum allowed pressure differ-
ence for the assembled socket.
18 15.8 M12x1.0 11.5 20.5 21.5 4.0 10.5 14
20 19.2 M14x1.0 15.5 25.0 22.0 4.0 12.5 17
20 21.5 M16x1.0 17.0 29.5 28.0 4.0 14.5 19
28 27.0 M20x1.0 18.0 33.0 34.0 6.0 18.5 24
34 34.0 M25x1.0 22.5 39.0 43.0 6.5 23.5 30
45 40.0 M35x1.0 28.0 50.5 78.5 7.5 33.5 –
58 54.0 M48x1.5 22.0 51.0 – 6.0 45.5 –
HGW Fixed socket, nut fixing, with back washer,
watertight or vacuumtight
Reference
Model Series
HGW 0S
HGW 1S
Note: vacuumtight version is only available in the 0S series.
L maxi
ø B
E mini/maxi
e
ø A
M
S 3
Dimensions (mm)
AB e L MS3
E
mini
E
maxi
10 15 M9x0.6 2.5 6.3 17.5 1.2 11
14 18 M12x1.0 2.2 9.7 20.2 1.5 14
P11
Panel cut-out (page 152)
P3
Panel cut-out (page 152)
Watertight or vacuumtight models