Datasheet
3
Characteristics Standards Units
Eigenschaften Normen Einheit
TYPES / TYPEN
Number of contacts
Anzahl der Kontakte
Contact ø (male pin)
mm
Kontakt ø (männlich)
Solder bucket ø
mm
Lötloch ø
AWG max.
Max. AWG
Crimp bucket ø
mm
Crimploch ø
AWG max. - min.
3)
Max. - min. AWG
3)
Wire insulator ø max.
mm
Aderisolation ø max.
Contact resistance
2)
IEC 60512-2
m Ω
Kontaktwiderstand
2)
test 2a
Insulation resistance IEC 60512-2
Ω
Isolationswiderstand test 3a
Air clearance min.
5)
IEC 60664-1
mm
Min. Luftstrecke
5)
(§ 1.3.2)
Creepage dist. min.
6)
IEC 60664-1
mm
Min. Kriechstrecke
6)
(§ 1.3.3)
Operating voltage
1)
kV dc
Betriebsspannung
1)
Operating voltage
1)
kV rms
Betriebsspannung
1)
Test voltage IEC 60512-2
kV dc
Prüfspannung test 4a
Test voltage IEC 60512-2
kV rms
Prüfspannung test 4a
Breakdown voltage IEC 60601-1
kV dc
Durchbruchspannung (§ 20.1)
Rated current IEC 60512-3
A
Nennstrom test 5a
24567891014
1.3 0.9 0.9 0.7 0.7 0.7 0.5 0.5 0.5
1.1 0.85 0.85 0.6 0.6 0.6 0.45 0.45 0.45
20 22 22 26 26 26 28 28 28
1.4 1.1 1.1 0.8 0.8 0.8 – – –
18-20 20-24 20-24 22-26
4)
22-26
4)
22-26
4)
–––
2.2 1.7 1.7 1.4 1.4 1.4 – – –
< 3.5 < 4.5 < 4.5 < 6.5 < 6.5 < 6.5 < 8.5 < 8.5 < 8.5
> 10
12
> 10
12
> 10
12
> 10
12
> 10
12
> 10
12
> 10
12
> 10
12
> 10
12
1.3 1.2 0.8 0.85 0.85 0.6 0.6 0.45 0.5
1.3 1.2 0.8 0.85 0.85 0.6 0.6 0.45 0.5
0.6 0.6 0.5 0.5 0.5 0.5 0.4 0.4 0.3
0.4 0.4 0.35 0.35 0.35 0.35 0.29 0.29 0.2
1.8 1.8 1.5 1.5 1.5 1.5 1.2 1.2 0.9
1.2 1.2 1.05 1.05 1.05 1.05 0.85 0.85 0.6
13 13 13 13 13 13 13 13 13
1087655332
TECHNICAL CHARACTERISTICS / TECHNISCHE EIGENSCHAFTEN
Characteristics
Eigenschaften
Average retention force when pulling on the cable
Mittlere Ausreisskraft mit Zug auf das Kabel 1N = 0.102 kg
Cable retention force (depends on cable construction)
Ausreisskraft des Kabels (abhängig vom Kabelaufbau) 1N = 0.102 kg
Endurance
Lebensdauer
Working temperature range (PSU shell)
Betriebstemperaturbereich (PSU Körper)
Working temperature range (PEI shell)
Betriebstemperaturbereich (PEI Körper)
Value Standards
Wert Normen
90 N IEC 60512-8 test 15f
50 - 150 N IEC 60512-9 test 17c
> 1000 cycles
IEC 60512-5 test 9a
> 1000 Zyklen
-50/+150°C –
-50/+170°C –
CONTACTS / KONTAKTE
The female contacts are made of bronze Bz4 (UNS C54400). The male contacts are made of
brass (UNS C38500 or C34500). All contacts receive three different platings, copper (0.3 µm)
then nickel (3 µm as per FS-QQ-N-290A) and finally 0.5 µm of gold (as per ISO 4523).
Die Buchsenkontakte sind aus Bronze Bz4 (UNS C54400), und die Stiftkontakte aus Messing
(UNS C38500 oder C34500). Sie werden nachher verkupfert (0.3 µm), dann vernickelt (3 µm
nach FS-QQ-N-290A) und mit 0.5 µm Gold vergoldet (nach ISO 4523).
N = 20.5
a maxi
N = 22.2
N = 20.5
c
ød
b
Dimensions (mm)
Abmessungen (mm)
abc d
Types
Typen
M02
M04
M05
M06
M07
M08
M09
M10
M14
2.5 6 5 0.7
2.5 6 5 0.7
2.5 6 5 0.7
2.5 4 3 0.5
4.5 4 3 0.5
4.5 4 3 0.5
3.9 4 3 0.5
3.9 4 3 0.5
3.9 4 3 0.5
Solder contact / Kontakt zum Löten Crimp contact / Kontakt zum Crimpen Print contact / Kontakt für Print
Note: coding shown on insulator is from rear side of plug.
1) Depending on specific application and related standard,
more restrictive operating voltage may apply. We suggest operating
voltage = 1/3 test voltage.
2) After 1000 mating cycles and corrosion test per IEC 60512-6 test 11f.
3) The variance in conductor strandings which are quoted as being a specific
AWG is so large that some can have cross section which is not sufficient to
guarantee a crimp as per the IEC 60352-2 standard.
4) If conductor ø < 0.8 mm.
5) Shortest distance in air between two conductive parts (for solder contacts).
6) Shortest distance along the surface of the insulating material between two
conductive parts (for solder contacts).
Bemerkung: Kodierung ist von der Rückseite des Isolierteils angezeigt.
1) Gemäss spezifischer Anwendung und entsprechender Norm könnte eine bes-
chränktere Betriebsspannung angewendet werden. Wir schlagen
Betriebspannung = 1/3 Prüfspannung vor.
2) Nach1000 Steckzyclen und Korrosion test nach IEC 60512-6 test 11f.
3) Die Variation in als spezifischer AWG angeführte Leiterverseilungen ist so gross,
dass einige einen Querschnitt haben, der nicht genügt, eine Crimpung
gemäss der Norm IEC 60352-2 gewährzuleisten.
4) Wenn Leiteraufbau < ø 0.8 mm.
5) Kürzeste Luftstrecke zwischen zwei leitenden Teilen (für Kontakte zum Löten).
6) Kürzeste Strecke entlang der Isolationsmaterialoberfläche zwischen zwei
leitenden Teilen (für Kontakte zum Löten).