Datasheet

141www.lemo.com
®
®
A bend relief made from thermoplastic polyurethane elas-
tomer (Desmopan 786) can be fitted over LEMO plugs and
sockets that are supplied with nut for fitting such bend relief.
They are available in nine different colours that match with
the GRA insulating washers (see page 144).
Use the part numbers shown below to order this acces-
sory separately.
Bend relief (Polyurethane)GM
●
Note: The «GMD» are thin bend reliefs (for very flexible cables).
The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page 142 and
replace the letter «G» by the letter of the required colour.
See also detailed information for each series: B series on page 54: K series on page 54; S series on page 107; E series on page 107.
L
ø A
Main characteristics
● Material: Polyurethane elastomer
● Temperature range in dry atmosphere: -40°C +80°C
2.5 24 2.9 2.5
3.0 24 3.4 3.0
3.5 24 3.9 3.5
4.0 24 4.4 4.0
4.5 24 5.2 4.5
4.0 36 4.5 4.0
4.5 36 5.0 4.5
5.0 36 5.5 5.0
6.0 36 6.5 6.0
7.0 36 7.7 7.0
7.8 36 8.8 7.8
4.5 42 5.2 4.5
6.0 42 6.9 6.0
7.0 42 7.9 7.0
8.0 42 8.9 8.0
9.0 42 10.0 9.0
2.5 30 2.9 2.5
3.0 30 3.4 3.0
3.5 30 3.9 3.5
4.0 30 4.4 4.0
4.5 30 4.9 4.5
5.4 30 6.0 5.4
6.5 30 7.0 6.5
1.2 22 1.4 1.1
1.8 22 2.1 1.8
2.5 22 2.8 2.5
2.8 22 3.1 2.8
3.2 22 3.5 3.2
2.5 22 2.8 2.5
2.8 22 3.1 2.8
3.2 22 3.5 3.2
00
8.0 60 9.0 8.0
10.0 60 10.9 10.0
11.0 60 11.9 11.0
12.0 60 13.0 12.0
13.5 60 14.5 13.5
0B
0S
0E-0K-0L
2B
2S
2E-2K-2L
2C-2G
3S
3B
3E-3K
4S
1B-1D
1S
1E-1K-1L
4S
4B
4E-4K
Part number
GMA.00.012.DG
GMA.00.018.DG
GMB.00.025.DG
GMB.00.028.DG
GMB.00.032.DG
GMD.00.025.DG
GMD.00.028.DG
GMD.00.032.DG
Dimensions (mm)
Bend relief Cable ø
ALmax. min.
Series
Part number
Dimensions (mm)
Bend relief Cable ø
ALmax. min.
Series
GMA.0B.025.DG
GMA.0B.030.DG
GMA.0B.035.DG
GMA.0B.040.DG
GMA.0B.045.DG
GMA.2B.040.DG
GMA.2B.045.DG
GMA.2B.050.DG
GMA.2B.060.DG
GMA.2B.070.DG
GMA.2B.080.DG
GMA.3B.050.DG
GMA.3B.060.DG
GMA.3B.070.DG
GMA.3B.080.DG
GMA.3B.090.DG
GMA.4B.080.DG
GMA.4B.010.DG
GMA.4B.011.DG
GMA.4B.012.DG
GMA.4B.013.DG
GMA.1B.025.DG
GMA.1B.030.DG
GMA.1B.035.DG
GMA.1B.040.DG
GMA.1B.045.DG
GMA.1B.054.DG
GMA.1B.065.DG