Datasheet

59www.lemo.com
®®
S 2
~M
~L
ø A
FFP Straight plug, cable collet
and inner anti-rotating device
9.0 34.5 24.5 6.5
12.0 42.5 31.5 8.5
14.8 52.0 40.0 11.0
17.8 61.0 46.0 14.0
24.8 77.0 59.0 19.0
Reference
Model Series
Dimensions (mm)
ALMS2
FFP 0S
FFP 1S
FFP 2S
FFP 3S
FFP 4S
S 2
~M
~L
ø A
~M
~L
ø A
S 1
S 2
FFL Straight plug, flats on latch sleeve,
cable collet and inner anti-rotating device
FFB Straight plug, cable collet
and safety locking ring
9.0 36.8 26.8 6.5
12.0 45.0 34.0 8.5
14.8 55.5 43.5 11.0
17.8 65.0 50.0 14.0
Reference
Model Series
Dimensions (mm)
ALMS2
FFB 0S
FFB 1S
FFB 2S
FFB 3S
15.0 49.0 37.0 13 12
Reference
Model Series
Dimensions (mm)
ALMS1S2
FFL 2S
Note: not available with nut for fitting a bend relief.
ø A
~M
~L
S 2
FFE Straight plug, cable collet, front seal
and nut for fitting a bend relief
1)
(protected to IP54 when mated)
7.4 26.0 18.0 6
10.0 34.5 24.5 7
13.0 42.5 31.5 9
16.0 52.0 40.0 12
19.0 61.0 46.0 14
Reference
Model Series
Dimensions (mm)
ALMS2
FFE 00
FFE 0S
FFE 1S
FFE 2S
FFE 3S
Note:
1)
to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
Note: this model is fitted with a «D or M» type collet system.
It is also adapted for crimp contacts.
Available only for multipole.
M1
Cable assembly (pages 163 and 164)
M1
Cable assembly (pages 163 and 164)
M1
Cable assembly (pages 163 and 164)
M4
Cable assembly (page 165)