Datasheet

82 www.lemo.com
®
®
ø B
~M
ø C
~L
N
H 1
H 2
ø A
EBR Fixed socket with round flange, watertight,
protruding shell and screw fixing
Reference
Model Series
EBR 2E 28 15 2.8 11.8 20.4 32.5 28.0 19 25
Dimensions (mm)
ABCH1 H2 LL
1)
MN
ø A
e
ø B
S 1
S 3
M
E maxi
L maxi
HGP Fixed socket, nut fixing, watertight or vacuumtight
Reference
Model Series
HGP 0E
HGP 1E
HGP 2E
HGP 3E
HGP 4E
HGP 5E
HGP
2)
6E
These socket or coupler models allow the device on which they are fitted to reach a protection index of IP 68 as per IEC 60529.
They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equip-
ment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Mechanical and Climatical
Technical Characteristics
Note: The 5E and 6E series are delivered with a round nut.
1)
unipole model.
2)
with key (G).
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
- 20° C/+80° C
> 144h IEC 60512-6 test 11f
20/80/21 IEC 60068-1
< 10
-7
mbar.l.s
-1
IEC 60512-7 test 14b
Endurance
Humidity
Temperature range (0E-1E)
Temperature range (2E-6E)
Salt spray corrosion test
Climatical category
Leakage rate (He)
1)
Characteristics Value Standard
Note:
1)
only for vacuumtight models.
18 19.2 M14x1.0 5.5 23.5 22.0 4.0 12.5 17
20 21.5 M16x1.0 9.0 29.5 28.0 4.5 14.5 19
25 27.0 M20x1.0 10.5 32.5 28.0 5.0 18.5 24
31 34.0 M24x1.0 15.5 39.5 38.5 6.0 22.5 30
37 40.5 M30x1.0 17.5 43.0 44.0 6.5 28.5 36
55 54.0 M45x1.5 20.0 52.0 76.0 9.0 42.5 –
65 65.0 M55x2.0 20.5 52.0 – 10.0 52.0 –
Dimensions (mm)
AB e E L L
1)
M S1 S3
Note:
1)
unipole model.
This model is only available in a watertight version.
60 bars
60 bars
40 bars
30 bars IEC 60512-7 test 14d
15 bars
5 bars
5 bars
0E
1E
2E
3E
4E
5E
6E
Characteristics Value Standard
Maximum operating
pressure
2)
Note:
2)
this value corresponds to the maximum allowed pressure differ-
ence for the assembled socket.
Watertight or vacuumtight models
P1
Panel cut-out (page 153)
P6
Panel cut-out (page 153)