Extra Information

L-3807 replacing the needle
Replacing the needle.
1. Press with a finger on point A and press with a finger on point B.
2. Carefully pull the needle (orange part) with your other hand into the
direction of arrow 1 to disconnect it from the cartridge (make sure there is
enough counter pressure with finger A+B).
3. Remove the plastic protection cover from the new cartridge and carefully
remove the needle.
4. Press with a finger on point A and press with a finger on point B.
5. Carefully push the needle (orange part) with your other hand into the
opposite direction of arrow 1 to connect it with the cartridge (make sure
there is enough counter pressure with finger A+B).
For information and support, www.lenco.eu
Or contact us by e-mail: [e-mail] by phone: [phone]
A
B
1