Operation Manual

7
Audacity Quick Guide
For software updates / software please check:
http://audacity.sourceforge.net
For the complete manual please check:
http://audacity.sourceforge.net/help/documentation?lang=en
WARNING: WHEN USING WINDOWS 7 PLEASE REFER
TO THE DOCUMENTATION ON PAGE 21.
Before Starting the Software
Make sure that your USB turntable is plugged into the computer and both
the computer and the turntable are plugged in and on.
Note:
Before connecting the turntable to the PC, disconnect the turntable from
your audio-system.
This turntable is a plug-and-play devise so the operating system on your
PC does not need any drivers for installation of the turntable.
Before installing the Audacity software please make sure that the operating
system recognizes the turntable as recording hardware and not as playing
hardware.
To Install Software (Windows)
1. Plug in your turntable to an AC outlet and connect the USB port
on the Turntable to the USB port of your computer.
2. Turn on the power switch to your turntable.
3. Windows system will detects a new device and that it is available
to use.
4. Insert the CD that came with your USB turntable.
5. Run the file “audacity-win-1.2.6.exe” to install Audacity software.
Once installed, run the Audacity program.
To Install Software (MAC)
1. For MAC software please check:
http://audacity.sourceforge.net