2014010 CSR8635 V1.1 USER’S MANUAL Boost-4 Bluetooth Stereo Speaker with Aux Input & NFC Splash-proof For more information: www.lenco.
014010 CSR8635 V1.1 A. Warning Don’ts • Do not place naked flames, such as lighted candles on or near the product. • Do not place objects filled with liquids, such as vases on or near the product. • Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration. • Do not use this product with wet hands. • Do not block or cover the slots and holes in the product. • Do not push foreign objects into the slots or holes in the product.
2014010 CSR8635 V1.1 B.
2014010 CSR8635 V1.1 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Description Micro USB socket (DC Input: DC 5V 1A) Power Switch ON – OFF AUX IN (3.
2014010 CSR8635 V1.1 D. Power ON and Pairing 1. Slide the “Power Switch (2)” to “ON” position to turn On the device, the Bluetooth searching / reconnect function are open; 2. A series of tones will sound and the “Bluetooth (11)” LED is fast blinking in blue. 3. Then, activate the Bluetooth function in your Bluetooth device (such as Mobile Phone or Personal Computer); the device will enter to Bluetooth searching mode automatically, if not, tap the relate selection to manually enter to searching mode.
2014010 CSR8635 V1.1 G. Switch to new pairing from connected mode 1. In Bluetooth connected mode, you can switch the Bluetooth Speaker into Bluetooth searching mode for paring with the new device at any time you desired; 2. Press and hold the “ (6)” button until a series of tones sound and the “Bluetooth (11)” LED will turn to fast blinking in blue from lighting. 3. Now you can process for new mobile device pair. (refer to item D.3 ~ D.6 methods) H. a. 1. 2.
2014010 CSR8635 V1.1 2. Press and hold the “ (9)” button to increases the volume level. 3. Press and hold the “ (8)” button to decreases the volume level. 4. When maximum or minimum volume is reached, a beep sound will be heard. 5. Press the “ (9)” button to change next music file play. 6. Press the “ (8)” button to change previous music file play. J. Hand Free Function 1. When there is an incoming call during Bluetooth music playing mode; 2.
2014010 CSR8635 V1.1 a. Use AUX In under power ON mode: (Bluetooth un-paired) 1. Make sure that the external device has switched on and controlled to AUX output source with music playing. 2. Slide the “Power Switch (2)” to “ON” position to turn on the device; 3. Connect the Bluetooth Speaker’s “AUX IN (3)” jack with an external device’s “Earphone / AUX / LINE” jack output through the Audio cable. 4.
2014010 CSR8635 V1.1 O. Trouble Shooting No power • Check battery is it charged with enough energy. • Check whether the device is in power OFF mode. • Check whether volume level is in lower position on your Bluetooth speaker and mobile device. • Make sure that your Bluetooth device is within the effective operation range. No sound • Check whether the Bluetooth device is paired. • Check whether the Bluetooth device show connected. • Check if you have selected the correct audio source.
2014010 CSR8635 V1.1 R. Service and Support For information: www.lenco.com For support: http://lencosupport.zendesk.com Lenco helpdesk: Germany 0900-1520530 (Local charges) The Netherlands 0900-23553626 (Local charges + 1ct p/min) Belgium 02-6200115 (Local charges) France 03-81484280 (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. When contacting Lenco, you will always be asked for the model and serial number of your product.
2014010 CSR8635 V1.1 T. CE Maring Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Hereby, STL Group BV, Ankerkade 20 NL 5928 PL Venlo, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at https://lencosupport.zendesk.