USER’S MANUAL Boost-6 Bluetooth Stereo Speaker with Aux Input NFC & Power Bank Splash-proof For more information: www.lenco.
A. Warning Don’ts Do not place naked flames, such as lighted candles on or near the product. Do not place objects filled with liquids, such as vases on or near the product. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration. Do not use this product with wet hands. Do not clean this product with water or other liquids. Do not block or cover the slots and holes in the product.
B.
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Description AUX IN (3.
function, so it does not recommend you connect to computer’s USB port for charging the Bluetooth Speaker, as well as you use the Bluetooth operation at the same time. It needs longer time to charge the battery fully, and the Bluetooth Speaker will result works unstable or not proper working especially the internal battery energy is in lower level. D. Power ON and Pairing 1. Slide the “Power Switch (2)” to “ON” position to turn On the device, the Bluetooth searching / reconnect function are open; 2.
3. 4. G. 1. 2. 3. it in Bluetooth searching device mode and in connection range. If no device found in some seconds, then the Bluetooth Speaker will automatically turn into pairing mode. Now you can process for new mobile device pair. (refer to item D.3 ~ D.
b. 1. 2. 3. 4. 5. 6. “Down / Up” button/icon on your Bluetooth device. (refer to your device user’s manual when necessary) On Bluetooth Speaker: In playing music, press “ / (9)” button to pause the playing music. Press it again to resume. Press and hold the “ (11)” button to increases the volume level. Press and hold the “ (10)” button to decreases the volume level. When maximum or minimum volume is reached, a beep sound will be heard. Press the “ (11)” button to change next music file play.
M. Use AUX IN Function In this design, the Bluetooth module give priority to Bluetooth function as master, the AUX In function is become slave, if Bluetooth has been connected and in playing mode. a. Use AUX In under power ON mode: (Bluetooth un-paired) 1. Make sure that the external device has switched on and controlled to AUX output source with music playing. 2. Slide the “Power Switch (2)” to “ON” position to turn on the device; 3.
3. Always wipe the Bluetooth Speaker surface thoroughly if it becomes wet with moisture or water splashes. This will help to prevent the internal parts of the unit from entry of water and possible moisture damage. O. Power Bank Function (Charge Output DC 5V 1A max.) Before use the power bank function, make sure that the Bluetooth Speaker’s internal battery is full charged. Or, we recommended, it has enough energy, about 51 ~ 75% or more, for charge the external device. a.
P. Trouble Shooting No power Check battery is it charged with enough energy. Check whether the device is in power OFF mode. Check whether volume level is in lower position on your Bluetooth speaker and mobile device. Make sure that your Bluetooth device is within the effective operation range. No sound Check whether the Bluetooth device is paired. Check whether the Bluetooth device show connected. Check if you have selected the correct audio source.
apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual. S. Service and Support For information: www.lenco.com For support: http://lencosupport.zendesk.com Lenco helpdesk: Germany 0900-1520530 (Local charges) The Netherlands 0900-23553626 (Local charges + 1ct p/min) Belgium 02-6200115 (Local charges) France 03-81484280 (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive). U. CE Maring Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community.