20141202 CSR8635 V1.0_r2 BEDIENUNGSANLEITUNG Boost-6 Bluetooth Stereo-Lautsprecher mit Aux-Eingang NFC & Leistungsbank Spritzwassergeschützt Für weitere Informationen: www.lenco.
0141202 CSR8635 V1.0_r2 A. Warnung Verbote Stellen Sie keine offenen Flammen, wie brennende Kerzen, auf oder in die Nähe des Produktes. Stellen Sie keine mit Flüssigkeiten gefüllten Gegenstände, wie Vasen, auf oder in die Nähe des Produktes. Verwenden oder bewahren Sie dieses Produkt nicht an Orten auf, in denen es direkter Sonneneinstrahlung, Hitze, übermäßigem Staub oder Vibration ausgesetzt ist. Bedienen Sie dieses Produkt nicht mit nassen Händen.
20141202 CSR8635 V1.0_r2 B.
20141202 CSR8635 V1.
20141202 CSR8635 V1.0_r2 Benutzen Sie einen USB-Netzadapter mit den folgenden Eigenschaften: 5 V / 2 A. Wenn Sie ein Netzteil geringerer Stromstärke wie z.B. 0,5 A oder 0,8 A benutzen, ist die Ladezeit 3 oder 4 Mal so lang. Wichtig: Das Gerät ist mit einer hohen Audio-Ausgangsleistung und einer Leistungsbank-Funktion ausgestattet, sodass davon abgeraten wird, den USB-Anschluss Ihres Computers für das Aufladen des Bluetooth-Lautsprechers zu verwenden.
20141202 CSR8635 V1.0_r2 3. 4. In diesem Fall tritt der Bluetooth-Lautsprecher wieder in den Modus „Searching/Pairing“ (Suchen/Koppeln) ein, es werden eine Reihe von Tönen ausgegeben und die blaue LED „Bluetooth (13)“ wechselt von einem Dauerleuchten zu einem Blinken. Nun können Sie mit der Kopplung neuer mobiler Geräte fortfahren oder den Bluetooth-Lautsprecher ausschalten. F. Automatische Wiederverbindung mit einem gekoppelten Gerät 1.
20141202 CSR8635 V1.0_r2 (Wenn die Geräte verbunden sind, erscheint auf einigen Mobiltelefonen ein Bestätigungsdialog auf dem Bildschirm) 3. Nach erfolgreicher Kopplung gibt der Bluetooth-Lautsprecher einen Ton aus und die blaue LED „Bluetooth (13)“ wechselt von einem Blinken zu einem Dauerleuchten. 4. Wenn Sie den Bluetooth-Lautsprecher von einem über NFC verbundenen Telefon trennen möchten, berühren Sie die Erkennungsmarkierung erneut mit dem Mobilgerät.
20141202 CSR8635 V1.0_r2 2. 3. Der Klingelton ertönt und die Musikwiedergabe wird automatisch pausiert. Drücken und halten Sie den Schalter „ / (9)“, um den Anruf bei Bedarf abzulehnen. Oder, 4. Drücken Sie den Schalter „ / (9)“, um den Anruf entgegen zunehmen. 5. Jetzt haben Sie die Freisprech-Funktion über den Bluetooth-Lautsprecher. 6. Drücken Sie erneut auf den Schalter „ / (9)“, um das Gespräch zu beenden. Die pausierte Musik wird automatisch fortgesetzt.
20141202 CSR8635 V1.0_r2 einzuschalten; 3. Verbinden Sie für die Wiedergabe über Audiokabel die „AUX IN (1)“-Buchse des Bluetooth-Lautsprechers mit der „Kopfhörer/AUX/LINE“-Buchse des externen Gerätes. 4. Der Modus wird automatisch auf die Funktion „AUX IN“ umschalten und die LED „AUX IN (13)“ leuchtet grün mit blauem Blinken. Nun wird die AUX In-Funktion des Bluetooth-Lautsprechers verwendet. b. Verwendung von AUX In unter Bluetooth-Musikwiedergabe-Modus: 1.
20141202 CSR8635 V1.0_r2 möglichen Feuchtigkeitsschäden zu schützen. O. Leistungsbank-Funktion (Ladeausgang max. DC 5 V 1 A) Stellen Sie vor der Verwendung der Leistungsbank-Funktion sicher, dass der interne Akku des Bluetooth-Lautsprechers vollständig aufgeladen ist. Oder er, sollte, nach unserer Empfehlung, über mindestens 51% - 75% oder mehr verbleibende Leistung verfügt, um das externe Gerät zu laden. a. Um den verbleibenden Akkuladestand zu überprüfen: 1.
20141202 CSR8635 V1.0_r2 Die Ladeausgangsversorgung schaltet sich automatisch nach 30 Sekunden aus. Wichtig: Die Leistungsbankfunktion kann nicht aktiviert werden, wenn der Akkuladestand unterhalb von 25% liegt, auch dann nicht, wenn Sie die Ausgangsladefunktion versuchen einzuschalten. P. Fehlersuche Kein Strom Kein Ton Keine Antwort vom Lautsprecher Ü berprüfen Sie, ob der Akku ausreichend aufgeladen ist. Ü berprüfen Sie. ob sich das Gerät im Strom-AUS-Modus befindet.
20141202 CSR8635 V1.0_r2 I/O NFC-Anschluss Spritzwassergeschützt Betriebstemperatur Audio In Link Für Bluetooth-Kopplung IPX-4 0 bis 40 °С 800 mV RMS, 10K Ohm R. Haftungsausschluss Aktualisierungen der Firmware und/oder Hardware-Komponenten werden regelmäßig durchgeführt. Daher können einige der Anweisungen, Spezifikationen und Abbildungen in dieser Dokumentation von Ihrer individuellen Situation abweichen.
20141202 CSR8635 V1.0_r2 Dieses Gerät ist nicht für professionelle Zwecke geeignet. Falls das Gerät für professionelle Zwecke eingesetzt wird, erlöschen alle Garantieverpflichtungen seitens des Herstellers. T. Recycling Dieses Symbol zeigt an, dass das entsprechende Produkt oder dessen Batterie in Europa nicht mit dem normalen Hausmüll entsorgt werden darf.