Operation Manual

7
3. To select auxiliary audio input, press the POWER button until the status LED indicator lights
green steadily.
4. Turn on the external auxiliary audio device.
5. The volume can now be controlled through the unit.
Operate all other functions on the external device as usual.
Notes: (a) Press and hold the POWER button to turn off the unit when you finish listening.
Don't forget to switch off the power of the external audio device as well.
(b) If there is without any music (signal) presented at the AUX-IN input jack for around 10
minutes, the unit will turn into standby mode automatically.
3D Sound effect
This model integrated sonic emotion 3D sound technology which uses (WFS) wave field
synthesis to create the illusion of sounds all around. Any input even stereo can be used including
the iPhone/iPad/iPod Touch/Smart phone Bluetooth
®
streaming music or Aux-in music being in
stereo; by using WFS from sonic emotion, the 3D sound effect can create a virtual sound field
where you can enjoy the finest audio no matter where you are in the room from a single device.
Sonic emotion and Sonic Emotion 3D sound are registered trademarks of sonic emotion ag.
Technical data
Power Adaptor Input: AC 100 - 240V ~ 50/60Hz
Output: DC 15V 2400mA
Power Supply for the unit DC 15V 2400mA
Speaker Output Total 35W (Max.)
Operating temperature 0 ~ +35 degree C
and Humidity 70%
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany 0900-1520530 (Local charges)
The Netherlands 0900-23553626 (Local charges + 1ct p/min)
Belgium 02-6200115 (Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model and serial number of your
product. The serial number can be found on the back of the device. Please write down the serial
number below: